This product is a Mabe 15kg/15kg Washer Dryer, an all-in-one appliance that includes a top-load washer and a front-load electric dryer. Your specific model, MCL1540EEDGX, is a high-capacity unit (15kg/33 lbs) specifically designed for international markets (220-240V). Key Specifications * Capacity: 15kg for both washing and drying (can accommodate large loads like comforters). * Washer Features: 7 wash cycles, 5 water temperatures, and 4 water levels using the "Infuser" wash system (a gentle system on clothes that uses less water than traditional systems). * Dryer Features: 4 drying cycles and 4 temperature levels. It is an externally vented dryer. * Electrical Requirements: 220-240V / 50-60Hz. (Note: This is an export voltage, so ensure your laundry room is properly wired). Installation Requirements Before unboxing and installing the unit, consider these "hidden" requirements: * Water Lines: Unlike some smaller units, this appliance requires hookups for both hot and cold water. It does not heat wash water internally. * Drain: It needs a standard drain pipe or a laundry sink for the drain hose. * Venting: You will need a rigid or flexible metal vent duct, 10cm (4 inches) in diameter, that leads to the outside of the house. * Weight: At approximately 125kg (275 lbs), you will definitely need two people and a sturdy appliance dolly to move it. Quick Unboxing Tip As indicated on the box, do not lay this unit on its side. These stacked units have a heavy wash tub suspended by springs; laying it on its side could cause the tub to hit the frame or dislodge the suspension system, resulting in a very loud "clunk" sound or damage to the appliance upon first use. Would you like me to look up the specific electrical plug type or a copy of the installation manual for you?