Centrifugal water pump (dynamo), Italian-made by the renowned company Pedrollo, its specific model is F 50/250A Information: 1. Motor Power: 25 HP (i.e., 25 horsepower, a massive pump for large farms or industrial facilities). Power in kilowatts: 18.5 kW. Frequency and rotational speed: Operates at a frequency of 60 Hz and a rotational speed of up to 3500 rpm (min⁻1) to provide high pressure. 2. Mechanical Performance (Flow Rate and Head): Water pumping volume (Q): ranges between 300 to 1000 liters per minute (equivalent to 18 to 60 cubic meters per hour). Head or pressure (H): pumps water to a height ranging between 73 to 85 meters. At maximum flow rate (1000 L/min), the head is 73 meters. At minimum flow rate (300 L/min), the head reaches 85 meters. Maximum head (H max): provides a maximum pressure of 85 meters. 3. Electrical Connection and Amperage (3-Phase): The pump operates on a 3-phase system and supports two connection methods depending on your grid voltage: Delta connection (Δ): If the electricity voltage is 220 volts, the current consumption is 64 amperes. Star connection ( ext{Y}): If the electricity voltage is 380 volts, the current consumption is 37 amperes. 4. Protection and Insulation Specifications: Protection level (IP 55): excellently protected against dust and water splashes from all directions, making it suitable for outdoor installation. Insulation class (I.Cl. F): its coils withstand high operating temperatures. Duty cycle (S1): designed for heavy-duty and continuous operation without stopping. Location: Hail Al-Qa'id Pickup from location