1. Read and diagnose all computer faults (DTCs) in the car and clear them with a single button press. 2. Access Freeze Frame data to understand the exact conditions under which the fault occurred. 3. Read Live Data for all sensors and actuators with precise graphing. 4. Perform Active Tests to experience and test components in real-time. 5. Perform SAS Calibration (Steering Angle Sensor Calibration) after suspension work or inspection. 6. Perform Zero Point Calibration for the ABS and VSC systems. 7. Program and code new injectors (Injector Coding) and adjust learning values. 8. Reset the automatic transmission memory (Reset Memory / Fast Learn) after transmission overhaul or oil change. 9. Program and register new keys and remotes (Key & Remote Programming). 10. Erase lost keys and reset the immobilizer system (Immobilizer Reset). 11. Reprogram and update car computer software (ECU Reprogramming / J2534 PassThru). 12. Test and activate the fuel pump (Fuel Pump Test) to ensure its efficiency and pressure. 13. Individually disable and activate fuel injectors to identify misfiring cylinders (Misfire Test). 14. Perform EVAP System Test (Evaporative Emission System Test). 15. Read and diagnose the SRS Airbag System computer and read sensor data. 16. Adjust and relearn the electronic throttle body (Throttle Body Re-learn) after cleaning. 17. Read the efficiency of O2 sensors and the Air-Fuel Ratio (AFR) sensor. 18. Read Short Term and Long Term Fuel Trims. 19. Test and monitor Variable Valve Timing (VVT-i Actuator Test). 20. Read and monitor transmission oil, engine oil, and general temperatures in real-time. 21. Inspect and test the Body Control Module (BCM) and test electrical accessories. 22. Modify security and convenience settings (Customize Settings) such as automatic door locking. 23. Mute or activate the seatbelt warning chime. 24. Adjust the automatic light sensor level and the delay for lights after exiting the vehicle. 25. Inspect and diagnose electronic air conditioning system faults and read pressure and temperature sensors. 26. Read and test the Electronic Power Steering (EPS) system. 27. Calibrate and register TPMS sensor IDs (TPMS Sensor ID Registration). 28. Perform brake bleeding for the braking system and ABS (Brake Bleeding). 29. Full diagnostic check for all components and systems of the hybrid system (Toyota Hybrid Health Check). 30. Read and check the efficiency and voltage balance of hybrid battery cells (Hybrid Battery Cell Voltage). And much more, contact me and I will not fall short with you, God willing.