Bambulab A1 Mini Combo
BambuLab A1 Mini 3D Printer
BambuLab AMS
Bambulab PLA Basic
1kg / 1.75mm / any color
1. Bambu Lab A1 Mini 3D Printer
Build Volume: 180 x 180 x 180 mm.
Speed and Acceleration:
Max Print Speed: Up to 500 mm/s.
Max Acceleration: 10,000 mm/s2.
Max Hot End Flow: 28 mm3/s.
Hot End and Metal Parts:
Hot End: All-Metal up to 300°C.
Nozzle: 0.4mm Stainless Steel (default) with support for 0.2, 0.6, 0.8mm sizes.
Extruder Gears: Hardened Steel.
Filament Cutter: Automatically integrated.
Heatbed:
Included Plate: Bambu Textured PEI Plate.
Max Bed Temperature: 80°C.
Sensors and Smart Systems:
Vibration Compensation: Automatically measures and calibrates vibrations.
Active Flow Rate Compensation: High-frequency sensor to measure pressure inside the nozzle and adjust flow.
Full Auto Calibration: Fully automatic calibration of Bed Leveling, Z-offset, and vibrations before each print.
Additional Sensors: Run-out sensor, Tangle sensor, and power loss recovery.
Monitoring Camera: Built-in low frame rate camera (1080P) supporting Time-lapse.
Screen and Connectivity:
Screen: 2.4-inch IPS Touchscreen (320 x 240).
Connectivity: Wi-Fi, Bambu-Bus system, and Micro SD card port.
Software: Bambu Studio or Bambu Handy app (with support for external slicer software like PrusaSlicer and Cura).
Dimensions and Weight:
Printer Dimensions: 347 x 315 x 365 mm.
Net Weight: 5.5 kg.
2. Bambu Lab AMS lite Multi-Color Feeder System
Number of Colors/Spools: Supports installation of 4 filament spools simultaneously for multi-color or multi-material printing.
Filament Diameter: 1.75 mm.
Supported Spool Widths: 40 to 68 mm.
Supported Materials via AMS lite: PLA, PETG, TPU, PVA.
Weight and Dimensions:
Net Weight: 1.6 kg.
Total Weight of Combo (Printer + AMS): Approximately 10.2 kg.
3. Bambu Lab PLA Basic Filament
Diameter: 1.75 mm (± 0.03 mm).
Net Weight: 1 kg (1000 grams).
Empty Spool Weight: ~240 grams.
Recommended Print Settings:
Nozzle Temp: 190 - 230°C.
Bed Temp: 35 - 45°C.
Recommended Print Speed: Up to 250 - 300 mm/s without sacrificing interlayer adhesion.
Physical Specifications:
Density: 1.24 g/cm3.
Built-in RFID Chip: The original Bambu Lab spool contains a chip that the AMS system automatically recognizes to adjust filament type, color, and print settings without manual intervention.
